***************  log instalare fedora 10 11.2008***************
Buguri Fedora 10:
- se blocheaza mplayerul cateodata cand dau pauza
- sunt probleme cu Bluetooth manager: pot sa copiez insa nu pot sa scriu in memoria telefonului
01.12.2008
- instal vls: su -c 'yum -y install vlc'
- instalat k3b
- instalat hp3600
- instalat wine - ok
	probleme cu offline cd browser:
	err:module:import_dll Library MSVBVM50.DLL (which is needed by L"C:\\windows\\system32\\encrypter.ocx") not found
	err: CTL3D32.DLL  ~/.wine/drive_c/windows/system32/
	Merge greu functia de cautare
- instalat audacious - play mp3
- instalat azureus pentru torente - ok
;.............................
- Flash plugin ; a 2a solutie (*) este buna
 * http://fedorasolved.org/browser-solutions/flash
 - install the Adobe repository for flash: su -c 'rpm -Uvh http://linuxdownload.adobe.com/adobe-release/adobe-release-i386-1.0-1.noarch.rpm'
 - Install the flash plugin using yum: su -c 'yum install flash-plugin'
 - To use the 32bit plugin with x86_64 firefox, you must install the nspluginwrapper.i386 package to enable the 32-bit Adobe Flash plugin in x86_64  
    Firefox and the pulseaudio-libs.i386 packages to enable sound from the plugin. 
	- Install the nspluginwrapper.i386, nspluginwrapper.x86_64 and pulseaudio-libs.i386:
	   su -c "yum -y install nspluginwrapper.{i386,x86_64} pulseaudio-libs.i386 libcurl.{i386,x86_64}"
	- Run mozilla-plugin-config to register the flash plugin: su -c 'mozilla-plugin-config -i -g -v'
	INFO: Checking plugin installation /usr/lib/mozilla/plugins-wrapped/nswrapper_32_32.libflashplayer.so...
	INFO: FAIL: 
	INFO:         Original plugin isn't installed.
 * http://www.fedoraguide.info/index.php?title=Main_Page#Firefox_Plugins
 - Am dezinstalat: flash_plugin:  su -c 'yum erase flash-plugin', su -c 'yum erase libflashsupport' ; No Packages marked for removal
    + su -c 'yum erase nspluginwrapper'
 - wget http://download.macromedia.com/pub/labs/flashplayer10/libflashplayer-10.0.d20.7.linux-x86_64.so.tar.gz
   tar xvzf libflashplayer-10.0.d20.7.linux-x86_64.so.tar.gz -C ~/.mozilla/plugins
    ;............ok
- instalat mplayer - OK - nu mai sunt probleme ca in fedora 9 (fara mesaj de eroare) dar este instabil (se blocheaza des)
- instalat repo: RPM Fusion:  
Livna was to be merged with Dribble and Freshrpms to create a unified repository of add-on software called RPM Fusion http://rpm.livna.org/
Comanda folosita:
 su -c 'rpm -ivh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm 
http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm'
- am creat un cont nonroot si pot sa accesez fara probleme partitia windows.
- instalat fara probleme Fedora 10. Am tinut cont de:
	- Do not enable the System clock uses UTC  option if your machine also runs Microsoft Windows.
	Ar fi trebuit sa salvez fisiere de configurare gen 'bash_profile' pentru a avea un model
- burn Fedora-10-x86_64-DVD.torr.
- backUp fisiere
De citit:
- http://docs.fedoraproject.org/release-notes/f10/en_US/
- http://docs.fedoraproject.org/yum/en/
De instalat:
- K3b; skype; 
- IDL Version 6.2 (linux x86 m32). (c) 2005, Research Systems, Inc.Installation number: 20111111. Are si help ok
Linkuri utile fedora 10:
- http://www.fedoraguide.info/
- http://fedorasolved.org/post-install-solutions/
****************************** idl & f8 ****************************
* instalare idl_56 
./xinstall.linux.x86: error while loading shared libraries: libXp.so.6: cannot open shared object file: No such file or directory 
- incerc instalare libXp...i386; am deja instalate libXp si libXpm pt 64 - a mers- 
- eroare: /idl_5.6/bin/post_unpack was not found; incercat solutia de la 6.3; a functionat. setup a decurs bine 
- idl_5.6 ->: error while loading shared libraries: libXpm.so.4: cannot open shared object file: No such file or directory ; Solutie: 
instalat libXpm...i386 -> Ok...acum merge idl_5.6

* instalat idl 6.3 (default era instalat doar libXpm-64); instalat libXp-64; a plecat setup; /bin/post_unpack was not found; nu a copiat nici 
un fisier in /usr/local/rsi; Solutie: din directorul /idl_63/install/ am luat toate arhivele si le-am dezarhivat in /usr/local/rsi/ ; am 
repornit setup si am mers totul snur; cand lansez idlde_63, ? (help) -> error while loading shared libraries: libstdc++.so.5; install – 
libstdc++-devel_64; ramane aceiasi eroare; install gcc_64 (compilator c++) deoarece are nevoie de aceasta librarie; nu a mers; instalat: The 
compat-libstdc++ package contains compatibility standard C++ library from GCC 3.3.4. - ok, acum merge help-ul
* reinstalat f8; configura rep livna
- instalat idl_56; pb cu libXp-ul; dupa ce am dezinstalat libXpm.64 sistemul nu mai intra in modul grafic...am incercat sa reinstalaz 
diferite versiune libXp fara succes; solutie: reinstalat fedora 8 :(
- instalat wine.i386 din contul daniel-> eroare ca nu are spatiu; dezinstalat...astepta versiunea 86_64
 **************************** instalat f8 11.07 ************ - install repo livna; rpm -ivh http://rpm.livna.org/livna-release-8.rpm ; instalat mplayer
- instalat fara nici o problema fedora 8; au integrat bluetooths in sistem; ma conectez fara nici o problema cu nokia 6300; instalat azureus 
(torrents); k3b – scris dvd-uri
-  am folosit Partition Magic 7 pt a crea o partitie nealocata de 30G pt fedora 8 situata inaintea partitie Xp (c:)
- reinstalat Xp pe Hp nx7400; am folosit Hp recovery disc insa a dat o eroare ; partitia Fedoara 7 a fost stearsa. Nu a mers reinstalare Xp vers veche; 
zicea ca nu are unde sa instaleze (no hard-disk). Am reincercat cu Hp recov. Disk ; de data asta am formatat tot hardul si a mers.
***************************** strategie f8 11.07********************************
- download the full DVD version; incluedes a mode to perform rescue operations
- install Xp: ntfs 60G; partitia D ~ 30 G - pt f8;
***************************** conexiune nokia 6300 - hp nx7400 bluetooth - f 7 -10.07 ****************************************
 install obexfs - FUSE based filesystem using ObexFTP; am reusit sa citesc cartela cu comanda: 'obexfs -b 00:1E:3A:30:92:31 /mnt/t1' (un fel de mount). 
umount se face folosind comanda: fusermount -u /mnt/t1 ; am reusit sa scriu si sa citesc de pe cartela; initial nu puteam deoarece numele directorului 
continea un caracter specific limbii romane 
- install obexftp; pot sa accesez directoarele telefonului insa merge f greu; 
- instalat wammu; nici acest program nu suporta sa trimita fisiere; pot sa editez contactele si alte lucruri care nu ma intereseaza acum 
- instalat xgnokii; merge doar pt sms; contacte -mai putin transfer fisiere 
- progrese  bluetooth conectare cu fedora; am reusit sa vad mobilul cu gnokii --identify; a trebuit sa fac modificari in fisierul gnokiirc; am setat 
portul Bluetooth folosind comanda 'hcitool scan' ; la model am folosit 'AT'; din pacate nu pot sa folosesc gnokii....comenzi de genul 'gnokii 
--getfilelist B: ' nu sunt implementate pt modelul 6300!!!  *****************************Editare video 
*****************************************
--------------- 15.10
- Conversie avi folosind MJPEG-tools ; https://sourceforge.net/docman/display_doc.php?docid=3456&group_id=5776
Rezulat la incercare conversie: lav2mpeg -m mpeg2 -o output.mpg botez04.avi -> AVILIB: error - DV AVI Type 1 no supported
--------------- 10.10
- instalat avidemux pentru editare, compresie video; compilare: ./configure ; trebuie instalat gtk2-devel -ok ; trebuie instalat spidermonkey 
(Mozilla's C implementation of JavaScript)...out of time - FAILED
- instalat pitivi- ok; nu pot incarca fisierul video (botez.avi): Internal data stream error
- instalat cinelerra - Heroine Virtual Ltd. video editing...nu pot sa incarc fisierul dorit
- instalat GL-117 is an action flight simulator
- instalat kino pt editare video - s-a inchis dupa ce am incarcat fisierul video
***************************** log f7 on nx7400 *********************************************
- update kernel package: '2.6.22.1-41.fc7' (02.08)
- tot aveam probleme cu 'suspend' and 'hibernate';  undo la toate schimbarile. odata cu update la versiunea de kenel '2.6.22.1-33.fc7' problema a fost 
rezolvata
***************************** install f7 - 07.07 ********************************************
- change your mac: 'ifconfig eth0 down hw ether 00:00:00:00:00:01' 'ifconfig eth0 up'
- make suspend permanent: http://people.freedesktop.org/~hughsient/quirk/quirk-suspend-try.html 
- to suspend or hibernate for HP-nx7400: 'pm-suspend --quirk.vbe_post --quirk.vbemode_restore' or 'pm-hibernate ...'
- to start a service automatically at boot use at command prompt 'ntsysv' . To work offline uncheck 'network' 
  service' -> no more "determining ip information"
- Beryl is the cool cube desktop you may have seen in many videos and screenshots around the web - OK
   http://www.my-guides.net/en/content/view/59/26/1/2/
- Flash plugin (http://www.my-guides.net/en/content/view/26/26/) - OK
- mplayerplug-in is a browser plugin that uses mplayer to play digital media from websites. - ok
- instalat mplayer - ok; 
- k3b (burning dvd) - OK
- FreshRPMs Repository: - OK
   rpm -hiv http://ftp.freshrpms.net/pub/freshrpms/fedora/linux/7/freshrpms-release/freshrpms-release-1.1-1.fc.noarch.rpm
   rpm --import http://freshrpms.net/RPM-GPG-KEY-freshrpms
  You can disable FreshRPMs Repository -> /etc/yum.repos.d/freshrpms.repo ; and change "enabled=1" to "enabled=0"
- instalat prin compilare MPlayer v1.0rc1 --- failed---probleme cu X11
- instalat gcc-c++ - 4.1.2-12 -> C++ GNU Compiler Collection - OK
- instalat wine si CrossOver Linux Standart pt a vedea cu care merge mai bine Offline cd browser. Aplicatia ruleaza cu aprox. aceiasi viteza la 
ambele programe. nu stiu daca merita 35e crossover
***************************** fedora 7 - HP Compaq nx7400 - buguri ********
- functiile hybernate nu functioneaza intotdeauna
- wireless-ul
******************************07.07****************************************
- update 100 packages - OK
- mount ntfs partition: in .bash_profile put the following line: 'mount -t ntfs-3g /dev/sda1 /mnt/ntfs/'
- alias: in /etc/bashrc put the following line: 'alias sshvenus='ssh user@194.102.58.129''
**********************************************************************
* Instalat Fedora 7 - iulie 07
1) Fedora 7 Installation Guide - notite:
 - Windows and the System Clock: Do not enable the System clock uses UTC  option if your machine also runs Microsoft Windows
 -  If the hardware clock in your computer is highly inaccurate, you may turn off your local time source entirely. To turn off the local time source, 
select Show advanced options and then deselect the Use Local Time Source option. If you turn off your local time source, the NTP servers take priority 
over the internal clock. If you enable the Enable NTP Broadcast advanced option, Fedora attempts to automatically locate time servers on the network.  
 - The rescue disc starts the rescue mode system by default. To load the rescue system with the first installation disc, enter: linux rescue
2) creat partitia D ~ 30 G - nealocata ca spatiu si la instalare f7 am ales: 'use free space to create default partition scheme'
**********************************************************************
* stiva comenzi linux
comanda1 && comanda2 && comanda3
18 aprilie:
- invatat emacs...scriere la un anumit rand intr-o anumita coloana
- instalat avi-xmms-1.2.3.tar.gz; un plug-in pt avi codat divx...; dezarhivare cu Nautilus si instalare prin metoda
clasica: ./configure; make; make install...
NB:You can remove the program binaries and object files from the source code directory by typing `make clean'.
"make" a generat urmatoarele erori:
make[4]: *** [inputpin.lo] Error 1
make[4]: Leaving directory `/home/danteb1178/kituri/avi-xmms-1.2.3/lib/videocodec/DirectShow'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/danteb1178/kituri/avi-xmms-1.2.3/lib/videocodec'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/danteb1178/kituri/avi-xmms-1.2.3/lib'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/danteb1178/kituri/avi-xmms-1.2.3'
make: *** [all-recursive-am] Error 2
Dupa aceasta eroare ..."make clean"
- din README: SDL library (www.libsdl.org) is required to play movies using avi-xmms.???
*************************************************************
NB: pt a uni comenzile: ./configure && make && make install
******************************************************************************
- instalat mplayer: http://www.mplayerhq.hu/design7/dload.html
Card video: S3 Trio3D
- get libavcodec directly from the FFmpeg CVS server; The FFmpeg project provides libavcodec, a very portable codec
collection (among the supported formats is MPEG-4/DivX). A directory named 'ffmpeg'with subdirectories named 'libavcodec' and 'libavutil' inside 
 will be created.
Copy these subdirectories into the MPlayer source tree...???....copy OK
- STEP2: Installing Binary Codecs:
Unpack the codecs archives and put the contents in a directory where MPlayer
will find them. The default directory is /usr/local/lib/codecs/ (it used to be
/usr/local/lib/win32 in the past, this also works) but you can change that to
something else by using the '--with-codecsdir=DIR' option when you run'./configure'....am creat director /lib/codecs/
si am copiat codecurile acolo...OK
- STEP3: Configuring MPlayer:
Dezarhivare-OK; copiat directoarele /ffmpeg/libavcodec/ si /ffmpeg/libavutil/ in ../MPlayer-1.0pre7try2/..OK
./configure --enable-gui ---if you want to use the GUI...OK; Check configure.log if you wonder why an autodetection
failed (check whether the development headers/packages are installed)....OK
make...error:
make -C libavcodec LIBPREF=lib LIBSUF=.a
make[1]: Entering directory `/home/danteb1178/kituri/MPlayer/MPlayer-1.0pre7try2/libavcodec'
Makefile:423: ../common.mak: No such file or directory
make[1]: *** No rule to make target `../common.mak'.  Stop.
make[1]: Leaving directory `/home/danteb1178/kituri/MPlayer/MPlayer-1.0pre7try2/libavcodec'
make: *** [libavcodec/libavcodec.a] Error 2
- compilat ffmpeg.../configure..ok; make...working
...copiat din nou in /MPlayer-1.0pre7try2/...make clean..si incercat din nou ./configure && make..error:
make -C doc all
make[1]: Entering directory `/home/danteb1178/kituri/MPlayer/ffmpeg/doc'
texi2html -monolithic -number ffmpeg-doc.texi
Split loop at /usr/bin/texi2html line 5354,  line 1370.
make[1]: *** [ffmpeg-doc.html] Error 25
make[1]: Leaving directory `/home/danteb1178/kituri/MPlayer/ffmpeg/doc'
make: *** [documentation] Error 2
******************************************************************************
* instalat bittorent 4.4............OK
******************************************************************
- install pygtk vers. 2.8.0...../configure; make; make install;.....OK
- Install BitTorrent by running: python setup.py install............OK
changing mode of /usr/local/bin/bittorrent to 755
changing mode of /usr/local/bin/bittorrent-curses to 755
changing mode of /usr/local/bin/bittorrent-console to 755
changing mode of /usr/local/bin/maketorrent to 755
changing mode of /usr/local/bin/maketorrent-console to 755
changing mode of /usr/local/bin/launchmany-curses to 755
changing mode of /usr/local/bin/launchmany-console to 755
changing mode of /usr/local/bin/changetracker-console to 755
changing mode of /usr/local/bin/torrentinfo-console to 755
changing mode of /usr/local/bin/bittorrent-tracker to 755
- run bittorent..error: File "/usr/local/bin/bittorrent", line 177, in ?   import gtk   ImportError: No module named gtk
- cum se ruleaza bittorent?...nu stiu
- verificat ca bittorent a fost instalat...nu se vede cu Yumi (acesta vede doar pachete rpm)
- dezinstalat bittorent pt a verifica daca mai apare fereastra de dowload de pe situl bittorent...nu stiu
- am reusit sa descarc ceva...; creat director bittorent in downloadsNet; descarcat de pe situl bittorent un fisier de
tip torrent; de la consola: bittorrent-console "numele fisierului torrent"
******************************************************************
 15 aprilie:
- studiat GTK: GTK+ is a multi-platform toolkit for creating graphical user interfaces.
N.B.: pentru a instala un program folosind "source package"(de obicei are extensia ".tar.gz"), se dezarhiveaza
programul: tar xvfz gtk+-2.0.0.tar.gz.  In the toplevel of the directory that is created, there will be a shell script
called configure which you then run to take the template makefiles called Makefile.in in the package and create
makefiles customized for your operating system. The configure  script can be passed various command line arguments to
determine how the package is built and installed. The most commonly useful argument is the --prefix argument which
determines where the package is installed. To install a package in /opt/gtk you would run configure as:
./configure --prefix=/opt/gtk
 A full list of options can be found by running configure with the --help argument. In general, the defaults are right
and should be trusted. After you've run configure, you then run the make command to build the package and install it.
make; make install
- GTK+ este deja instalat, insa cum aflu ce versiune este? Solutie: Search cu YUMI gtk+ -> este instalata versiunea
2.2.4-12..........OK
- instalat pygtk versiunea 2.8.0..Generat urmatoarea eroare:
checking for GLIB - version >= 2.8.0... no
*** Could not run GLIB test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GLIB is incorrectly installed.
configure: error: maybe you want the pygtk-2-4 branch?.....  -> trebuie instalat GLIB 2.8.0 ???
- instalat glib 2.8.0........am terminat ./configure..acum run "make"..make install...OK
******************************************************************
O alta abordate: compilat sursa, si instalat manual
- download BitTorrent-4.4.0.tar.gz; OK
- dezinstalare BitTorrent-Stable.rpm folosind Yumi Soft maneger...OK
- tar xvzf BitTorrent-4.4.0.tar.gz OK
- in fisierul install UNIX am gasit urmatoarele instructiuni:
 
How to install BitTorrent on a generic UNIX system:
----------------------------------------
Install Python, version 2.2.1 or later
http://python.org/....................OK
                                                                                                                             
Install GTK, version 2.2 or later
http://gtk.org/.......................OK
                                                                                                                             
Install pygtk, version 2.4 or later
http://pygtk.org/....................OK
                                                                                                                             
Install BitTorrent by running:
                                                                                                                             
$ python setup.py install
---------------------------------------------------
- cu Yumi software manager(System Tool) se verifica daca nu este deja
instalat; ..nu este
---------------------------------------------------
- cu Yumi software manager(System Tool) se verifica daca nu este deja
instalat; ..nu este
- download rpm: http://www.bittorrent.com/download.myt ; are nevoie de
Python 2.4...de verificat ce versiune este instalata local.
- download tar python 2.4-ok; incercat instalat fara a sterge versiunile
vechi: Unpack it with tar -zxvf Python-2.4.tgz ; Change to the Python-2.4
directory and run the "./configure", "make", "make install" commands to
compile and install Python.
- dezarhivat cu tar si sters arhiva;
- instalat cu success; outputul are urmatorul continut:
 (cd /usr/local/bin; ln python2.4 python)
/usr/bin/install -c -m 644 ./Misc/python.man \
        /usr/local/man/man1/python.1
- instalat BitTorrent-Stable.rpm...install ok
- prompter: bittorrent -> eroare:
File "/usr/bin/bittorrent-console", line
17, in ? from BitTorrent.platform import install_translation
ImportError: No module named BitTorrent.platform
- This error indicates that you have installed BitTorrent for the wrong
version of Python, or perhaps that you have multiple conflicting versions
of BitTorrent installed.
- in directourl Python-2.3.5 : make uninstall...nu merge
  
Info despre instalare si dezinstalare programe in linux:
http://www.tuxfiles.org/linuxhelp/softinstall.html
 
Legenda:
- X Window System = a graphics environment for UNIX systems.
- XFree86 = a freely redistributable open-source implementation of the X Window System.
- GUI = graphical user interface.
- libpng = is the official PNG reference library (originally called pnglib). It is a platform independent library that
contains C functions for handling PNG images.
- GTK+ = €is one of the most popular widget toolkits for the X Window System for creating graphical user
interfaces.
- CVS = Concurrent Versioning System. CVS is an open source version control and collaboration system.